Spiral Duct 45 Degree Bends

Spiral Duct 45 Degree Bends

1.Product Introduction

Spiral duct 45 degree Elbow is part of the Spiral fitting range; B45 is without rubber gasket, B45X is with factory-installed EPDM rubber gaskets.  The double gasket ensures tight and permanent connections between system components that are air-tight and do not require the use of mastic or sealant.
Saves time - quick and easy installation
Air-tight - no risk of leakage due to the class D rated EPDM rubber gaskets
Neat - ideal for exposed areas, as no need to use sealants
Assembling and adjusting is made easier

2.Product Parameter (Specification)

45° Bend, B45

B45/B45X	D(mm)	A(mm)	H(mm)
100	98.9	100	40
125	123.9	125	40
150	148.9	150	40
160	158.9	160	40
200	198.9	200	40

3.Product Feature And Application

Spiral Duct 45 Degree Bends from 80mm dia to 200mm dia are pressed.
Our range of segmented spiral duct bends start at 224mm dia upwards.
All spiral duct bends are half radius e.g. 100mm Bend = 50mm throat radius.
All spiral duct bends for spiral duct have a male connection to fit directly inside galvanised spiral duct (secure using recommended fixing methods).
If the application requires two bends to be joined, a female coupler will be required.
Our ventilation fittings are also supplied with EPDM rubber gaskets, this creates an airtight connection. In addition to producing pressed elbows, we also offer segmented Bends, choice of 15°, 30°, 45° , 60° and 90° bends
Vent Systems Elbow 45 Degree Duct Pipe Connector Flexible Round Tube Ventilation,Easy to install - fit perfectly with any other pipe, vent and connector. Push-fit duct and fittings together.Made out of a good quality galvanized steel.

4.Product Details

Spiral Duct 45° bends with rubber gaskets

Spiral Duct 45° Segmented bends with rubber gaskets